This article will provide you with a quick tutorial on how to eject water from your phone speaker.
The “how to remove water from phone speaker” is a question that has been asked many times. There are several ways that you can do this, but the easiest way is using a paper towel and some rubbing alcohol.
Have you ever put your phone in the toilet, sink, or pool by accident? If this is the case, you must take action as soon as possible to prevent inflicting more harm to the Speakerphone than it already has.
It’s vital to know that if water seeps into the speaker enclosure of your phone, the sound will be muted. When any form of moisture is left in your speaker, though, it may cause catastrophic harm if it dries out.
Furthermore, even if your phone is IP-rated for water protection, underwater exposure might cause the speaker to sound soft and distorted. There is presently no built-in means to evacuate the water, and leaving any form of moisture in the speaker might cause ongoing difficulties. These issues might include, but are not limited to:
- Audio is muffled (unclear sound)
- Having what we refer to as “Ghost Touch”
- Phones turn on and off. And there are plenty others.
You may also be interested in: Infinix XHIDE App: How to Download, Reset Password, and Recover Files
Nonetheless, in this post, we will provide you with some helpful hints on how to effectively remove water from your Speakerphone. We all know that accidents happen, but what counts most are the steps we take to prevent or react to them. With over 14 billion phones on the planet, it’s safe to assume that over 500 million of them will come into touch with water on a daily basis. When phones come into contact with water, all or some of the problems outlined above are likely to occur. As a result, we’ve devised a plan to immediately correct the bad scenario described below.
Shake Your Phone a Little:
If you discover that your phone has come into touch with any kind of water, the first thing you should do is attempt to play some music. If you hear a muffled sound coming from the phone’s speaker, forcefully shake the phone while facing the speaker downwards.
After that, blow air into the speaker using your lips. If you do this, the air will fall right on the speaker grills, warming it. We think that, to some degree, this procedure will dry the water or, at the very least, avoid major harm.
Using a hair dryer:
A hairdryer may also be a realistic alternative for ejecting water from your phone, thus it is strongly suggested if you have access to one. A hairdryer, on the other hand, is an electrical appliance that may be used to dry and style hair as well as eliminate water from any material.
A hairdryer can remove water out of your Speakerphone through its electric fan which blows air across a heating coil. When the air passes through the dryer, it heats up. As the warm air also reaches the Speakerphone, it helps to dry up the water.
Heat from Candlelight:
A candle, when it burns, is capable of generating heat, at least to a lesser degree or amount. Hence, the heat can be utilized to your advantage. After you must have shaken your phone vigorously, place the Speakerphone close to the candlelight to make it heat up. This means helps to dry up any atom of water or fluid on the Speakerphone, hence limiting any damage.
Technician on the phone:
After the prior stated options failed to proceed as intended, this may be considered as the final choice. If you are experiencing Ghost Touch or your phones are turning off and on, or if none of the methods given above have worked, we recommend that you see an expert phone technician as soon as possible to prevent a long-term phone issue.
Other options include:
Thankfully, there are a number of third-party applications that play a certain tone, creating sound waves that aid in the removal of all water from your phone. In a matter of seconds, most of these applications can clean and remove water from the speaker. It has been tried and tested and has a success record of over 80%.
The Speaker Cleaner app, for example, employs sine wave noises at certain frequencies to remove water from the speaker. These sound waves cause the speaker to vibrate, shaking out any water that has accumulated within. This software is designed exclusively for Android phones.
There is also the Sonic V (IOS). Although, it is sad to admit that this app doesn’t work on devices that lacks waterproof rating. If you insist on trying it, you will only succeed in damaging the Speakerphone.
What about the Siri Shortcut for Water Eject? Water Eject is a simple but effective Siri Shortcut for iOS that protects your premium Apple products once they come into touch with water by producing an ultra-low 165Hz frequency sound wave that eliminates water from the speaker cavity system.
Now, we deemed it necessary to give you a rundown on the various steps you can take in order to eject water from your Speakerphone and earpiece, especially using the Speaker Cleaner app or other water cleansing apps. Below are the steps;
How to Get Water Out of Your Phone’s Speaker:
First, go to the Google Play Store and download and install the Speaker Cleaner app. If you have an iPhone, the Sonic V app is available in the App Store.
Step 2: Now that you’ve downloaded the app, you’ll need to change the toggle to Speaker. Make sure the volume is turned up all the way, and then attempt to position your phone so that the speaker is facing down.
Step 3: After completing the previous steps, press the “Start Cleaning” button. You have now automatically played a sound that will assist in the ejection of the water.
Step 4: Next, turn the toggle to Earpiece and repeat the procedure while keeping the earpiece pointing downwards.
You will notice an improvement in the quality of your phone’s speaker after completing the aforementioned methods, as well as more water being expelled from it. If it doesn’t function as well as you intended, go to the second mode and repeat the instructions.
Visit TVshow4mobile.com to learn how to get the most recent TV series.
Alright! Here we go then. We have succeeded in providing you with the best way to eject water from your Speakerphone. These processes are tried and tested, and really works. Nevertheless, if you try it and it doesn’t work, I think it will be best to immediately contact a good phone technician. Meanwhile, you can share these articles to your loved ones by taping on the share icon below. You can also help us do better by commenting on this article through the comment box provided below. We got you covered.
If you’re looking for a way to get water out of your phone speaker, the “water eject” is one of the best methods. The “water eject” method involves using a vacuum cleaner or an air compressor to blow air into the speaker.
- how to get water out of your phone speaker android
- how to get water out of your phone speaker samsung
- clean my speaker
- how to get water out of your phone speaker iphone
- how to get water out of your phone speaker iphone 11